Abstract The performance of Salvinia natans macrophyte to recover lead and chromium from single and bicomponent solutions in batch and fixed bed systems was investigated. Equilibrium data were obtained through isotherms and fitted to Langmuir, Freundlich and D-R models for a single component system. In the fixed bed study the breakthrough curves were carried out at three different ratios of concentrations for the bicomponent study and at the concentration of 1 mmol.L-1 for the single system. In order to know the biosorption mechanism, FT-IR analyses were performed for S. natans before and after the uptake of metal ions. The results showed different functional groups in the biomass and the ability of these groups to bind Cr+3 and Pb2+. Studies of the binary system of Cr3+/Pb2+ are not common in the literature, which makes the experimental data obtained in this work very important for providing information that could be used in adsorption processes.

The bentonitic clays show good adsorptive characteristics, being used as alternative material for removing metals. This study evaluates several treatments (calcination, acid activation and treatment with sodium) of bentonite type Bofe in the removal of nickel and copper. Analyses were performed for physicochemical characterization of clay using the techniques: X-ray fluorescence (XRF), thermal analysis (TG and DTA), X-ray Diffraction (XRD), the ethylene glycol monoethyl ether (EGME) method, N2 adsorption (BET) and Scanning Electron Microscopy (SEM). Among the changes induced by acid activation and sodium transformations, the treatment with sodium chloride in fixed bed showed the highest performance in the monocomponent removal of nickel and copper.

This study aims to characterize the complex metal-clay formed by adsorption of lead. In this work, the bentonite clay named Fluidgel was calcined at 750 ºC and was used as adsorbent for lead removal. The characterization of this clay and complex metal-clay was carried out by X-ray diffraction (XRD), Fourier transformer infrared spectroscopy (FTIR), surface area (BET method), scanning electron microscopy (SEM) and chemical composition by energy dispersive X-ray (EDX). The removal of lead from aqueous solution was carried out in a fixed bed. Dynamic experiments were performed to evaluate the effect of flowrate on adsorption efficiency. The experiments were accomplished at room temperature, the clay adsorbent particle diameter was of 0.855 mm and the flow rate varied from 0.6 to 2 mL/min. The feed concentration of lead was about 0.24 mmol/L. Comparing the chemical compositions of the clays obtained by EDX before and after removal of the lead, it was concluded that the ion exchange process might be important to lead removal. From the semi-quantitative analysis of chemical composition in clays with and without adsorbed lead it was observed a reduction of the amount of Ca2+, K+ cations and the disappearance of Na+ cations, which was caused by cation exchange process.

This study evaluated the kinetic adsorption of Pb and Cu ions using rice husk ash as adsorbent in a fixed bed. The maximum adsorption capacities obtained for lead and copper ions in the fixed bed were 0.0561 and 0.0682 mmol/g (at 20 ºC), respectively. The thermodynamic studies indicated that the lead adsorption process was exothermic and spontaneous, while the copper adsorption process was endothermic and spontaneous. Characterization results indicated the presence of several functional groups, amorphous silica and a fibrous and longitudinal structure of rice husks. Rice husk ash (RHA) from northern Brazil can be used as a bioadsorbent for the individual removal of Pb(II) and Cu(II) ions from metal-containing effluents.

A aplicação de argilas para adsorção de metais pesados presentes em efluentes tem sido objeto de estudo em muitas pesquisas em virtude das inúmeras vantagens técnicas e econômicas. Este trabalho teve como objetivo obtenção de isotermas de adsorção de níquel e zinco em coluna de leito fixo utilizando como adsorvente argila bentonita calcinada a 500 ºC. Os experimentos para remoção de níquel e zinco foram conduzidos à temperatura ambiente (20 ºC - 25 ºC), pH da alimentação ajustado em 4,5, massa de argila calcinada de 15,5 g, com diâmetro médio de 0,855 mm, vazão de alimentação de 4 mL/min e concentração da solução de metal variando entre 0,5 meq/L a 4 meq/L. Os modelos de isoterma de Langmuir, Freundlich, Langmuir-Freundlich, Radke-Prausnitz, Redlich-Peterson, Sips e Toth foram ajustados aos dados de equilíbrio, sendo que o modelo de Langmuir apresentou melhor ajuste às concentrações de Ni2+ e Zn2+ adsorvido.

The use of clays for adsorption of heavy metals in wastewater has been studied in many trials because of numerous technical and economic advantages. This work aimed to evaluate the removal of nickel and zinc in fixed bed column. The experiments for the removal of nickel and zinc were conducted at room temperature (20 ºC - 25 ºC), pH adjusted at 4.5, weight of 15.5 g calcined clay,with an average diameter of 0.855mm, feeding flow rate 4 mL/min and concentration of the solution of metal between 0.5 meq/L to 4 meq/L. The Langmuir, Freundlich, Langmuir-Freundlich, Radke-Prausnitz, Redlich-Peterson, Sips and Toth models were fitted to equilibrium data, and the Langmuir model provided the best fit for adsorption isotherms.

Este trabalho tem como objetivo caracterizar a argila de Toritama, estado de Pernambuco, na sua forma "in natura" após ativação térmica a 500 °C visando sua utilização na remoção de Cd2+. A argila "in natura" foi caracterizada por meio de espectrometria de raios X por energia dispersiva (EDX), difração de raios X e análise textural usando adsorção física de nitrogênio (BET). As argilas ativadas termicamente (100, 200, 300, 400 e 500 °C) foram caracterizadas por difração de raios X. A argila ativada termicamente a 500 °C foi caracterizada por EDX e BET. A remoção do Cd2+ pela argila ativada termicamente foi realizada em sistema de banho finito. O tratamento térmico modificou levemente a área, como mostrou a análise de área de superfície específica, mas não modificou a distribuição de diâmetro de poros. Os dados experimentais para o sistema de banho finito se ajustaram aos modelos estudados, Langmuir e Freundlich; no entanto, o modelo de Freundlich foi mais satisfatório. O processo de remoção de cádmio em sistema de banho finito pela argila de Toritama ativada termicamente a 500 °C só atinge o equilíbrio depois de 120 min e apresenta um percentual de cerca de 86,8% de remoção de cádmio.

The purpose of this study is to characterize the clay of Toritama (Pernambuco, Brazil), in its form "in nature", and also after thermal activation at 500 °C, aiming its use in the removal of Cd2+. The clay "in nature" was characterized byg X-ray spectrometry by dispersive energy (EDX), X-ray diffraction (XRD), and surface area measurement by physical adsorption of nitrogen (BET). The thermally activated clay (100, 200, 300, 400 e 500 °C) was characterized by XRD. The thermally activated clay (500 °C) was characterized by EDX and surface area measurement (BET). The removal of Cd2+ by the thermally activated clay was carried out in a finite bath system. The thermal treatment of the clays slightly modified their area but did not change the pore diameters distribution. The experimental data for the finite bath system could be adjusted to both the studied adsorption isotherm models, Langmuir and Freundlich. However the Freundlich model was more satisfactory. The process of cadmium removal, in finite bath system, for thermally activated clay (500 °C) reaches the equilibrium after 120 min and presents about 86.8 % of cadmium removal.

Particle collection experiments were conducted in a fluidizing irrigated bed to evaluate the performance of mobile packings: 38 x 50 mm plain oblate spheroids 38 mm ID plain spheres and alternative perforated spheres with a 38 mm ID and 10% and 25% free areas were used as fluidizing media in a 0.264 m diameter and 1.20 m high turbulent bed contactor (TBC). Particle collection experiments were carried out above the minimum fluidization velocity, using as particulate test powder polysized alumina (size 1.5 to 5.5 mm). Experimental results demonstrated that the perforated spheres performed better in collecting particles than the other packings tested. The efficiency of particle collection was analysed based on energy consumption in the TBC, using the energetic efficiency concept. It was verified that not much more energy was consumed per unit of gas flow in fluidized beds of perforated packings than in those of conventional plain sphere packings, since the perforated spheres were more energetically efficient for particle collection than plain spheres and oblate spheroid packings.

Este artigo tem como principal objetivo caracterizar argilas esmectíticas chocolate de Boa-Vista, Estado da Paraíba (Brasil) na sua forma natural e após tratamento químico, visando a sua utilização na remoção de Pb2+ de efluentes sintéticos. Os métodos de caracterização utilizados foram fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e espectroscopia de raios X por energia dispersiva. Neste trabalho foi estabelecido o procedimento para remoção de Pb2+ a partir de um efluente inorgânico sintético, utilizando argila natural. Para avaliar a influência dos principais parâmetros, como pH, tratamento e granulometria da argila sobre a remoção do Pb2+, foi utilizado o planejamento fatorial e os melhores resultados obtidos foram: pH 4,5, granulometria entre 35 e 48 mesh, e argila natural.

The main objective of this paper is to characterize the Chocolate smectite clays of Boa-Vista, State of Paraíba (Brazil), in their natural form, and after chemical treatment for their application in the removal of Pb2+ from synthetic effluents. The following methods were used: X-ray fluorescence, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy. In is work the procedures for Pb2+ removal from a synthetic inorganic effluent using a natural clay were established. To evaluate the influence of the main parameters, such as pH, clay treatment and granulometry, on Pb2+ removal, factorial planning was used and the best results obtained were pH 4.5, granulometry in the range of 35 to 48 mesh and natural clay.